Product Description
Product Explanation:
Trunnion Mounted Forged Ball
ValveSize range: 2"-24"
Bore type: Full Bore and Reduced Bore
Working pressure: Class 150~Class 1500
Working Temp: -46° C~200° C
Material: A105, F304, F316 etc
1. Fire safe design
When the trunnion ball valve be used normally, its sealed by seat and ball surface, seat retainer sealed by O-ring and body, this is soft sealed and reliable sealing. When the seat and O-ring are burnt, the seat retainer and body will be sealed by expanded graphite. Thus act anti-fire safe purpose.
2. Anti-static device
In order to prevent friction among ball, stem and PTFE that generates static electricity which may light the combustibles and explosives that cause an accident, in this ball valve, static-conduction spring is set between the stem and the ball, the stem and the body. Thus static electricity is conducted to ground and system safety is secured.
3. Free leakage of body Sealed construction
The connective position of valve body and bonnet is double sealed by gasket and O-ring, on this base, such factors as fire, high temperature, shock and uneven opening or closing of the torque all can't induce external leakage.
4. Low torque in operation
The self-lubricated bearings are installed at the friction of stem, resulting in wear resistance, fiexibility of operation and low torque.
5. Double block&bleed(DBB)
When ball is full open or close position, the transmitter substance in center cavity of body can be released by drainage and emptying devices. In addition, the over loaded pressure in the center cavity of valve can be released to low pressure end by self relief seat.
6. Emergency sealing
Compound injection holes are designed and compound injection valves are installed at locations of stem/cap and body support of side valve. When sealing of stem or seat is damaged to induce leakage, the compound can be used to do the second time sealing. A concealed
Check Valve is installed in side of each compound injection valve to prevent compound from out flowing due to the action of transmitter substance. The top of the compound injection valve is the connector for fast connection with compound injection gun.
7. Extension stem
For the underground installed valve, the stem can be lengthened and for the convenience of operation the corresponding compound injection nozzle and drainage valve can be extended to the top of valve.
8. Automatic body cavity relief
When the body pressure going up un-normally as the unstable factor, the trunnion ball valve downstream seat will be pushed by unnormal pressure, and the release the un-normally pressure automatically, it doesn't damage to the sealing of upstream seat.
DN(inch) | Φ d | Port | L | H | H1 | A | W | Φ E1 | Φ E2 | P | Φ D | Φ S | T1 | T2 | Φ U1 | Φ U2 |
| 1/2" | 15 | 9.6 | 99 | 42 | 72 | 8 | 135 | 36 | 42 | 9 | 25 | 50.4 | - | 3.63 | 6 | 6 |
| 3/4" | 20 | 15.9 | 104 | 48.5 | 80 | 9 | 135 | 36 | 42 | 9 | 25 | 50.4 | - | 3.63 | 6 | 6 |
| 1" | 25 | 22.2 | 119 | 58.5 | 90 | 11 | 170 | 42 | 50 | 11 | 50.4 | 43.6 | 28.5 | 4.75 | 6 | 7 |
| 1-1/4" | 32 | 28.5 | 126 | 63 | 95 | 11 | 170 | 42 | 50 | 11 | 50.4 | 43.6 | 28.5 | 4.75 | 6 | 7 |
| 1-1/2" | 38 | 34.9 | 144 | 71 | 106 | 14 | 200 | 50 | 70 | 14 | 50.4 | 43.6 | 28.5 | - | 7 | 9 |
| 2" | 50 | 47.5 | 156 | 78 | 113 | 14 | 200 | 50 | 70 | 14 | 63.9 | 56.3 | 28.5 | - | 7 | 9 |
| 2-1/2" | 65 | 60.5 | 190 | 100 | 149 | 17 | 300 | 70 | 102 | 17 | 77.4 | 70.6 | 28.5 | - | 9 | 11 |
| 3" | 76 | 72.9 | 220 | 109 | 159 | 17 | 300 | 70 | 102 | 17 | 90 | 83.3 | 28.5 | - | 9 | 11 |
| 4" | 100 | 97.4 | 270 | 140 | 205 | 22 | 400 | - | 102 | 22 | 118.9 | 110.3 | 28.5 | - | - | 11
|
Why choose us?
(1) Quality, we only produce top-level quality products, we promise that all of our product's raw material are first class, and good quality system controls, so our goods' quality is very good.
(2) Price, our policy is that "Win-to-Win". That means in view of our long-standing business relationships, we only take small profit to help you for the marketing.
(3) Delivery, we alway have some products in stock, so we can complete the delivery within the time stipulated before.
(4) No MOQ, I think it is an attractive condition to some of you who have no big demands for each items temporarily.
Contact us if you need more details on Ball Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wafer End Ball Valve、Mini Ball Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pneumatic Valves > Pneumatic Ball Valves
